welcome to the fourth part in our Devolo home control system.
In this instalment we are going to review the heating control components, a TRV replacement actuator and a wall mounted thermostat.
This area of application ought to be one of the simpler ones to justify in a smart home. It can increase your comfort levels with a tailored heating profile which in turn ought to save you money on fuel costs. These savings will be even much more significant if you have minimal heating controls to start with. An added reward will be the reduction in CO2.
Chauffage
A wet heating system will typically use a central energy source such as a gas, oil or biomass boiler to heat water which is pumped around a series of emitters such as radiators. There are two essential elements of control that we will look at in the next section, how to control energy generation and its distribution.
Energy Generation
Energy is generated by firing the boiler. This is typically achieved by a time switch and / or central thermostat. This will consecutively bring in a pump and / or open values that will push water around the system. Our test property is fitted with a 4 zone time clock which switches 3 valves, 2 for a living and bedroom zone each with its own thermostat and domestic hot water with a cylinder thermostat. The 4th zone controls a Rayburn range for cooking.
The Devolo Thermostat (Art No: 9507) RRP £79.99, is developed to replace a regular wall thermostat. The principle is exactly the same as a conventional one, it tells the boiler when to come on or when to relocation a control valve on a zone or to control a set of radiators. The home control app then replaces the time switch element.
The Thermostat is branded as Devolo but will be familiar to some readers as the Z-Wave Danfoss temperature Sensor. Devolo like others have taken a tried and evaluated design and incorporated it into their range.
Adding the device was easy and a well illustrated process. once on the network the device was placed in the study and it was reporting temperature. similar to other Devolo devices you have access to the past 3 days history through a graph.
In our opinion there is a missing link in the Devolo range of heating components and that is the link to the boiler. Something needs to tell the boiler to come on or go off. There are Z-Wave devices and relays available on the market that will do this essential step in the process. This is a fundamental gap, without this you will have to rely on the existing heating controls and then only apply your smart home guidelines within that operational criteria.
Energy Emission
The energy is then emitted when the radiator releases heat to the surroundings. typically this was a fixed flow through radiators or zones. The introduction of Thermostatic Radiator Valves changed this approach. A TRV is a easy device that responds to its local temperature and actuates a plunger in the valve body, this is similar to you manually screwing a normal valve open or closed.
The Devolo Radiator Thermostat (Art No: 9502) RRP £59.99, is developed to replace an existing TRV actuator. It comes with a set of adapter rings to fit the common valve types. rather than depending on the expansion of a material in the TRV it uses a small motor to depress the valve pin. This pin pushes a valve inside the body to decrease or increase the flow of hot water. If the room is up to temperature the valve closes to stop the flow of hot water. If the room is not at its target temperature the valve will open to allow hot water to flow.
Again this is not a Devolo piece of equipment, it is based on the Danfoss Living connect LC-13. This design has been around for some time and there is no shortage of information about its performance.
Joining it to the home connect hub was the easy experience we’ve now come to expect from Devolo. The two AA batteries required for power are included and fitting it to the radiator was easy, our test house valves were all fitted within the last 6 years and were the standard thread size so fitted without any adopters. The device clamps itself in position by identifying the travel distance of the pin. initially it feels loose but once clamped in position it is very solid.
The device has three buttons on top and a small LCD screen. temperature Up, Down and the setup button. Without any app it is still possible for the user to change the temperature of the radiator. The set point will show on the backlit LCD screen.
We set up a schedule to keep the heat off in the mornings and only to heat the room in the evenings between 4:30 and 21:00.
The Valve does not report temperature back to the home control hub, only the target temperature. This always struck us as unusual as the device should be able to measure temperature to adjust the valve opening position to achieve the target temperature. For actual room temperature you will have to rely on another sensor.
Une chose que nous avons découverte est la durée de vie de la batterie. Dans les 6 semaines, car le montage des batteries est en baisse à 82%. À ce taux d’utilisation, ils ne dureront que 8 mois.
La chaleur est allumée
Devolo a lancé certaines parties d’un système de chauffage intelligent. Ceux-ci sont basés sur des composants éprouvés fabriqués par Danfoss. Ils sont assis de manière fiable sur le réseau de contrôle domestique, mais à notre avis, ils ne sont qu’une partie d’une solution.
Devolo a une forte concurrence dans ce domaine par rapport au génie thermique qui prend des composants similaires mais a développé une application intelligente sophistiquée pour utiliser maximum les modules, par exemple la compensation météorologique et les horaires d’apprentissage intelligents. Leur système utilise les mêmes parties mais fournit le contrôle de l’eau chaude domestique et du contrôle de la chaudière.
Nous pensons que Devolo devrait développer un certain nombre de packages complets, c’est-à-dire le contrôle total du chauffage et la gestion de l’énergie. Ces services techniques en profondeur à valeur ajoutée doivent garantir qu’ils ne sont pas une autre marque des mêmes composants sur l’étagère.
Résumé
Les composants rejoignent le réseau avec facilité et fonctionnent de manière fiable. L’application et le système logiciel seront très occupés si vous avez des appareils dans chaque pièce. L’absence d’un commutateur de chaudière limite la possibilité de créer une solution 100% Devolo. Les batteries du thermostat radiateur ne dureront certainement pas 2 ans, peut-être un an avec chance. Si vous souhaitez connaître la température ambiante réelle, vous devrez ajouter un autre appareil, la vanne du radiateur ne rapportera que la valeur cible. Il existe d’autres services plus intelligents, mais si vous voulez un contrôle de base, cela peut être pour vous.
28 avis
Devolo Home Control Room Thermostat (Automatisation via l’application iOS / Android, appareil domestique intelligent, commandes de chauffage intelligentes, thermostat de salle programmable, sans fil, onde Z) – blanc
Identifiez la température ambiante exacte à tout moment sur l’affichage illuminé
Contrôle unitaire facile et central de la température ambiante (lorsqu’il est combiné avec les thermostats de radiateur de contrôle de la maison Devolo)
Prêt à l’emploi en un rien de temps; peut être installé facilement sans outils spéciaux ni expertise
Achat sur Amazon
La prochaine fois
Dans notre dernier épisode, nous verrons comment le système de contrôle domestique fonctionne avec d’autres appareils producteurs. Nous résumerons également notre verdict du système de contrôle de la maison Devolo.
Devolo.com: Lisez la partie 1, la partie 2 et la partie 3
Partagez ceci:
Facebook
Twitter
Reddit
Liendin
Pinterest
E-mail
Suite
Whatsapp
Imprimer
Skype
Tumblr
Télégramme
Poche
Dernière mise à jour le 2021-10-04 / liens d’affiliation / images de l’API publicitaire du produit Amazon